YATTICH Paint Sprayer, High Power HVLP Spray Gun, with 5 Copper Nozzles & 3 Patterns, Easy to Clean, for Furniture, Fence, Car, Bicycle, Chair etc. YT-191
$59.99 - $54.99
(as of Jun 28,2022 21:15:41 UTC – Details)
YATTICH is committed to improve and enhance engineering designs to ensure product performance, never forget customer needs, and consistently provide timely services to our customer.
1. Worried about not knowing how to use it?
With super detailed instructions, even if you are a beginner, it is easy to use.
2. Worried about leaking?
We add a rear foam pad inside the product, which can prevent paint from flowing backwards, block the nozzle, and make the spray more uniform.
3. Worried about clogging?
We use copper nozzles, which can withstand pressure more than plastic nozzles, and is less prone to clogging. This is unique in the market. And for you to distinguish the size, we have engraved the specific size.
3 Spray Patterns
Three different types of spray patterns by simply adjusting the location of air cap: Horizontal-Vertical-Circular.
The flow control knob is a perfect design for you to adjust the flow rate at any time.
Copper Nozzles Size
More options, and suitable for more occasions and projects.
Compared with plastic nozzles, 5 copper nozzles can make the sprayer have better durability and not easy to block, and can reduce resistance and maintain good operating temperature and extend motor life.
Detachable design, the first is to consider portability, and is mainly convenient for quick and easy cleaning after spraying.
Every component is tested, can pass through 1.5m height drop test with full load in the bottle.
Adjustable Flow Control
By adjusting the flow knob to control the coating speed and the flow rate of the project size, you can achieve precise paint work.
With a maximum flow rate of 800ml / min, it is suitable for edges, corners and wide inner / outer surfaces of various work and DIY projects.
For chair, table, shutter, cabinets, wooden artwork, DIY etc.
Note: The smaller the size, the finer and the higher the surface quality.
Crafts Steel Furniture
For car, bicycle, model, railings, heating pipes, window frames, boats, garage doors, metal garden fences etc.
Interior / Exterior Walls
For internal wall, external walls, outdoor floors etc.
For yard furniture, wooden garden fences, wooden pile, corridor etc.
1. Before using, please choose proper copper nozzle, spray patterns. Check if you have tighten up the container and paint tube; In addition, we recommend that you test on cardboard or wooden boards before spraying important items, such as walls or furniture.
2. Please add some water(or paint thinner) to dilute the paint and stir to ensure that your paint passes smoothly through the viscosity cup within 100 seconds and meets your requirements.
3. After finishing spraying put the corresponding thinner in the container, then install the container on the product, and perform a similar operation as spraying to properly clean the container (The purpose is to clean the remaining paint in the containers, pipes and nozzles). Then remove the container and clean.
4. Please wash the sprayer gun immediately with the brush. All parts of the paint sprayer are detachable.
5. Most importantly, please read the product user manual carefully before using it.
Voltage: 110V / 60Hz
Power consumption: 500W
Nozzle size: 1.2, 1.5, 1.8, 2.0. 2.5, 3.0 mm
Max flow: 800 ml/min
Max viscosity: 100 DIN-s
Power cord: 2m
Spraying pressure: 0.1-0.2 bar
Vibration Level: < 2.5m/s²
N. Weight: 1.37 kg
What the package contains:
5 X replace copper nozzles
Nozzle cleaning needle
Suitable for small family projects
【3 Spray Patterns & 5 Nozzle Sizes】Paint sprayer can be adjusted to 3 different spray patterns: horizontal, vertical and circular, and equipped with 5 size nozzles (1.2mm/1.5mm/1.8mm/2.5mm/3.0mm) for any painting projects, such as furniture, cars, fences, interior walls, garage doors, garden tables and chairs etc.
【Perfect Design For User Experience】Detachable, making it easier to use and clean; the paint output can be controled by adjusting the flow control knob on the sprayer to obtain different paint output; The 6.6ft power cord is long enough to allow you to move freely within a larger work area.
【High-Quality Materials】Using copper nozzles can withstand pressure more than plastic nozzles, and is less prone to clogging. It can also make the spraying surface more concentrated and more uniform. The use of double-layer insulation materials allows you to avoid worrying about any safety issues during operation.
【Powerful Upgrade Advantages】The rear foam pad can prevent paint from flowing backwards, block the nozzle, and make the spray more uniform; it also has dust and moisture resistance functions, which can not only extend the life of the motor, but also ensure the purity and effect of spray color.
【Package Contents】1X Paint Sprayer, 1X 1000 ml Paint Container, 5X Size Nozzles, 1X Viscosity Cup , 1X Nozzle Cleaning Needle, 1X Cleaning Brush, 1X Spanner, 1X Lid Pot, 1X User Manual. If you have any questions, please contact with us, our technical team and after-sales team are always behind you.